|
CODE OFFICIAL TRAINING
PROGRAM |
|
The Mid-Atlantic Steel
Framing Alliance (MASFA), in cooperation with the Steel Framing Alliance (SFA)
and the Cold-Formed Steel Engineers Institute (CFSEI), provides these
seminars on cold-formed steel framing to building code officials at the
local level at no charge to help expedite the plan approval process.
These seminars cover the
provisions for cold-formed steel framing that are found in the International Residential Code (IRC) and the International Building Code (IBC), released by the International
Code Council (ICC). These provisions were developed by the National
Association of Homebuilders and the American Iron and Steel Institute for
the U.S. Department of Housing and Urban Development. Known also as the
Prescriptive Method for Residential Cold-Formed Steel Framing, these
provisions have been approved by the Council of American Building Officials
(CABO) One and Two Family Dwelling Code.
The Prescriptive Method for
Residential Cold-Formed Steel Framing is available for purchase on the SFA website,
www.SteelFramingAlliance.com , along with other technical material and
information. The IRC may be obtained from any of the model code
organizations, BOCA, ICBO, and SBCC.
We offer
Continuing Education Credits. 2 Hours.
|
|
PAST PRESENTATIONS |
| Presentations:
2005
Educode, Las Vegas, NV
BPI, Texas
2004
48th Annual Bldg Officials Institute, Minneapolis, MN
Minnesota Chapter of AIA
International Builders Show
Contractors Licensing Institute, Overland Park, KS
State of Ohio
Board of Building Standards, Columbus
ICC, Kansas City
University of Texas, Arlington
2003
ICC Chapter of Utah - Sandy City, Utah
Green County Building Regulations Dept - Dayton, OH
2002
Connecticut AIA
East Tennessee Building Officials
Spotsylvania/Fauquier County Code Officials - VA
Delaware County Building Department - Ohio
|
|
|
CONTACT |
Nader Elhaj
- Chair, Code Officials Training Committee
Director, Construction Standards Development - American Iron and
Steel Institute
Phone: 610-691-6334
E-mail: jlarson@steel.org |
|
REGIONS COVERED |
| Although MASFA
covers the Mid-Atlantic region, we have affiliates all over the country.
Essentially, anywhere you are, we can be. The program is presented at your
location, free of charge.
|
|
PROGRAM AGENDA |
Program Length: 2
Hours
Section 1 - Introduction to Steel Framing
-
Codes and
Standards
-
Steel
Framing Members
-
Labeling
and Nomenclature
-
Fastening
-
Construction Standards
-
Insulation
-
Plumbing
-
Electrical
-
Holes and
Penetrations
Section 2 - Floors and Foundations
-
Floor System
-
Foundation Attachment
-
Bearing/Web Stiffener
-
Joist Layout
- Rim
Joist/Track
-
Floor Sheathing Attachment
-
Floor to Wood Sill
-
Joist Bearing on Steel Stud Wall
-
Interior Walls
-
Splices
-
Floor Bracing
-
Joist Spans
-
Floor Openings
Section 3 - Walls and Wall Openings
-
Wall System/In-line Framing
-
Lateral Bracing
-
Wall Stud Design
-
Stud Tables
-
Wall Openings / Headers
-
Non-structural Walls
Section 4 - Roof Framing
-
Typical Roof Framing System
-
Connections
-
Ceiling Joists
-
Roof Rafters
-
Roof Openings
-
Steel Framed Roof Trusses
|
|
